One of the fundamental concepts of U.S. warfighting doctrine is combat power. The current U.S. Army definition is “the total means of destructive, constructive, and information capabilities that a military unit or formation can apply at a given time. (ADRP 3-0).” It is the construct commanders and staffs are taught to use to assess the relative effectiveness of combat forces and is woven deeply throughout all aspects of U.S. operational thinking.
To execute operations, commanders conceptualize capabilities in terms of combat power. Combat power has eight elements: leadership, information, mission command, movement and maneuver, intelligence, fires, sustainment, and protection. The Army collectively describes the last six elements as the warfighting functions. Commanders apply combat power through the warfighting functions using leadership and information. [ADP 3-0, Operations]
Yet, there is no formal method in U.S. doctrine for estimating combat power. The existing process is intentionally subjective and largely left up to judgment. This is problematic, given that assessing the relative combat power of friendly and opposing forces on the battlefield is the first step in Course of Action (COA) development, which is at the heart of the U.S. Military Decision-Making Process (MDMP). Estimates of combat power also figure heavily in determining the outcomes of wargames evaluating proposed COAs.
The Existing Process
The Army’s current approach to combat power estimation is outlined in Field Manual (FM) 6-0 Commander and Staff Organization and Operations (2014). Planners are instructed to “make a rough estimate of force ratios of maneuver units two levels below their echelon.” They are then directed to “compare friendly strengths against enemy weaknesses, and vice versa, for each element of combat power.” It is “by analyzing force ratios and determining and comparing each force’s strengths and weaknesses as a function of combat power” that planners gain insight into tactical and operational capabilities, perspectives, vulnerabilities, and required resources.
That is it. Planners are told that “although the process uses some numerical relationships, the estimate is largely subjective. Assessing combat power requires assessing both tangible and intangible factors, such as morale and levels of training.” There is no guidance as to how to determine force ratios [numbers of troops or weapons systems?]. Nor is there any description of how to relate force calculations to combat power. Should force strengths be used somehow to determine a combat power value? Who knows? No additional doctrinal or planning references are provided.
Planners then use these subjective combat power assessments as they shape potential COAs and test them through wargaming. Although explicitly warned not to “develop and recommend COAs based solely on mathematical analysis of force ratios,” they are invited at this stage to consult a table of “minimum historical planning ratios as a starting point.” The table is clearly derived from the ubiquitous 3-1 rule of combat. Contrary to what FM 6-0 claims, neither the 3-1 rule nor the table have a clear historical provenance or any sort of empirical substantiation. There is no proven validity to any of the values cited. It is not even clear whether the “historical planning ratios” apply to manpower, firepower, or combat power.
During this phase, planners are advised to account for “factors that are difficult to gauge, such as impact of past engagements, quality of leaders, morale, maintenance of equipment, and time in position. Levels of electronic warfare support, fire support, close air support, civilian support, and many other factors also affect arraying forces.” FM 6-0 offers no detail as to how these factors should be measured or applied, however.
FM 6-0 also addresses combat power assessment for stability and civil support operations through troop-to-task analysis. Force requirements are to be based on an estimate of troop density, a “ratio of security forces (including host-nation military and police forces as well as foreign counterinsurgents) to inhabitants.” The manual advises that most “most density recommendations fall within a range of 20 to 25 counterinsurgents for every 1,000 residents in an area of operations. A ratio of twenty counterinsurgents per 1,000 residents is often considered the minimum troop density required for effective counterinsurgency operations.”
While FM 6-0 acknowledges that “as with any fixed ratio, such calculations strongly depend on the situation,” it does not mention that any references to force level requirements, tie-down ratios, or troop density were stripped from both Joint and Army counterinsurgency manuals in 2013 and 2014. Yet, this construct lingers on in official staff planning doctrine. (Recent research challenged the validity of the troop density construct but the Defense Department has yet to fund any follow-on work on the subject.)
The Army Has Known About The Problem For A Long Time
The Army has tried several solutions to the problem of combat power estimation over the years. In the early 1970s, the U.S. Army Center for Army Analysis (CAA; known then as the U.S. Army Concepts & Analysis Agency) developed the Weighted Equipment Indices/Weighted Unit Value (WEI/WUV or “wee‑wuv”) methodology for calculating the relative firepower of different combat units. While WEI/WUV’s were soon adopted throughout the Defense Department, the subjective nature of the method gradually led it to be abandoned for official use.
In the 1980s and 1990s, the U.S. Army Command & General Staff College (CGSC) published the ST 100-9 and ST 100-3 student workbooks that contained tables of planning factors that became the informal basis for calculating combat power in staff practice. The STs were revised regularly and then adapted into spreadsheet format in the late 1990s. The 1999 iteration employed WEI/WEVs as the basis for calculating firepower scores used to estimate force ratios. CGSC stopped updating the STs in the early 2000s, as the Army focused on irregular warfare.
With the recently renewed focus on conventional conflict, Army staff planners are starting to realize that their planning factors are out of date. In an attempt to fill this gap, CGSC developed a new spreadsheet tool in 2012 called the Correlation of Forces (COF) calculator. It apparently drew upon analysis done by the U.S. Army Training and Doctrine Command Analysis Center (TRAC) in 2004 to establish new combat unit firepower scores. (TRAC’s methodology is not clear, but if it is based on this 2007 ISMOR presentation, the scores are derived from runs by an unspecified combat model modified by factors derived from the Army’s unit readiness methodology. If described accurately, this would not be an improvement over WEI/WUVs.)
The COF calculator continues to use the 3-1 force ratio tables. It also incorporates a table for estimating combat losses based on force ratios (this despite ample empirical historical analysis showing that there is no correlation between force ratios and casualty rates).
While the COF calculator is not yet an official doctrinal product, CGSC plans to add Marine Corps forces to it for use as a joint planning tool and to incorporate it into the Army’s Command Post of the Future (CPOF). TRAC is developing a stand-alone version for use by force developers.
The incorporation of unsubstantiated and unvalidated concepts into Army doctrine has been a long standing problem. In 1976, Huba Wass de Czege, then an Army major, took both “loosely structured and unscientific analysis” based on intuition and experience and simple counts of gross numbers to task as insufficient “for a clear and rigorous understanding of combat power in a modern context.” He proposed replacing it with a analytical framework for analyzing combat power that accounted for both measurable and intangible factors. Adopting a scrupulous method and language would overcome the simplistic tactical analysis then being taught. While some of the essence of Wass de Czege’s approach has found its way into doctrinal thinking, his criticism of the lack of objective and thorough analysis continues to echo (here, here, and here, for example).
Despite dissatisfaction with the existing methods, little has changed. The problem with this should be self-evident, but I will give the U.S. Naval War College the final word here:
Fundamentally, all of our approaches to force-on-force analysis are underpinned by theories of combat that include both how combat works and what matters most in determining the outcomes of engagements, battles, campaigns, and wars. The various analytical methods we use can shed light on the performance of the force alternatives only to the extent our theories of combat are valid. If our theories are flawed, our analytical results are likely to be equally wrong.